热处理对挤压态Mg-6Gd-5Y-1Zn合金组织与性能的影响

通过对Mg-6Gd-5Y-1Zn(质量分数,%)合金在固溶和时效处理状态下显微组织和力学性能的研究发现,α-Mg基体、沿挤压方向分布的条状18R-LPSO相、少量的Mg₂₄(GdYZn)₅ 相以及细层片状的14H-LPSO相构成了挤压态合金的组成相。挤压态合金经固溶(T4)处理后,一部分18R-LPSO相溶入基体,并且基体中的14H-LPSO相伸长同时粗化。挤压态合金经过固溶加时效(T6)处理后,大量β′相从α-Mg基体中析出。T6态合金的室温力学性能最好,其屈服强度、抗拉强度及伸长率分别为272 MPa、406 MPa和6.1%。β′相沉淀也发生在挤压态合金的直接人工时效(T5)处理过程,但相比于T6处理,14H-LPSO相和β′相在基体中的体积分数均偏低。     

紫金山东南矿段成矿期次、阶段浅析

通过对紫金山东南矿段铜钼(金)矿床地质矿化特征分析,指出铜钼矿化带主要赋存于花岗闪长斑岩的内外接触带,处于似斑状花岗闪长斑岩的上部,金矿化带赋存在表生氧化带的英安玢岩、隐爆角砾岩中。经过对矿石的组构特征、矿物生成顺序等特征分析,将矿床的成矿演化过程分为斑岩热液期、高硫化浅成低温热液期、表生氧化期三个主要矿化期次,进一步将斑岩热液期分为黑云母-钾长石化阶段、石英-绢云母化阶段、碳酸盐化阶段三个阶段;高硫化浅成低温热液期分为地开石化阶段、明矾石化阶段、硅化阶段三个阶段。研究结果为进一步研究矿床成因提供了依据。     

黄浦江下游吴淞口站低潮位重现期研究

黄浦江为感潮河流,低潮位重现期的确定对黄浦江航道的设计具有重要意义。为了准确估计黄浦江低潮位的重现期,以黄浦江下游吴淞口站年最低潮位序列为例,在对样本进行三性审查的基础上,分别采用传统的数理统计方法和时变矩方法进行水文频率分析。结果表明:吴淞口站年最低潮位序列在1996年发生了变异;还现修正后的序列服从位置参数线性时变的GEV模型,低潮位存在缓慢的上升趋势;一致性条件下百年一遇低潮位约为0.261 m,在非一致性条件下其重现期增大为150 a。非一致性条件下的重现期增大说明黄浦江现有的航道设计标准偏安全,航道通航保证率提高。     

Modelling of black carbon statistical distribution and return periods of extreme concentrations

Eight datasets of 1-h black carbon (BC) concentrations measured in Warsaw agglomeration (Poland), at urban background and sub-urban sites, and in Racibórz, a small town in Upper Silesia district (regional background site) were analyzed to evaluate BC levels, daily profiles and statistical distributions of concentrations in Central-Eastern European region. The observed mean levels ranged from 1483 ng m⁻³ in suburban site during summer to 3358 ng m⁻³ in regional background site in winter. Observed diurnal patterns were bimodal in the locations dominated by traffic emissions, but unimodal, with elevated evening peak in individually heated residential area. Three theoretical frequency distributions were applied to fit analyzed datasets separately. The lognormal distribution was the most appropriate to represent the middle-range values, while the high concentrations were satisfactorily predicted by the type I two-parameter exponential distribution which was used to estimate the return periods of extreme concentrations for winter months.     

Attitude-behaviour dissonance regarding the importance of food preservation for customers

The aim of the study was to identify the importance of individual food product attributes (the use of preservatives, processing method, shelf-life period and nutritional value) as well as their relation to the purchase behaviour. To achieve this, consumer preferences were decomposed in conditions of full access to information, and data was compared with actual consumer behaviour related to making purchasing decisions in front of the store shelf. Based on data from 338 respondents, conjoint analysis and repeated ANOVA measurements were carried out, allowing to eliminate individual behavioural patterns. The results showed a dissonance between the consumers attitudes towards the attributes and their shopping behaviour. The processing method was the most important declared attribute for consumers, meanwhile this information was the least searched for during purchase. At the same time, shelf-life period marked as the least important was the main information searched for by consumers when shopping. The results also show a clear dislike towards the use of microwaves as a preservation method, while traditional thermal preservation was marked as the most positive for consumers. In addition, consumers were classified into 3 heterogeneous groups, identifying differences in the preferences of food attributes. The obtained results have practical value relating not only to the preferences of individual attributes, but also to their various variants. The results can be a guide for companies to properly label food products. The indicated dissonance illustrates the educational gap and related insufficient motivation to get to know the product before buying it. This is extremely important in connection with technological development and new food processing methods.     

平面阵列波导光栅波导模式参量的分析

用周期波导的方法分析平面阵列波导光栅(AWG)的本征方程及波导模式参数,结果表明波导传播常数是带状分布的,与波导间隔有关。分析结果对器件的优化设计有一定的指导意义。     

传感器管理及其在相控阵雷达中的应用

传感器管理是数据融合的一部分。介绍了传感器管理的概念和框架 ,概述了国内外传感器管理算法的研究现状。主要工作是针对相控阵雷达这一传感器 ,通过对其不同工作模式以及不同参数的管理 ,来说明传感器管理的原理。提出了一种新的自适应采样周期算法 ,仿真结果表明该算法的优越性     

现役水工钢闸门结构可靠性鉴定时荷载取值分析

采用类比法确定现役水工钢闸门结构的荷载评估基准期。以静水压力为例，得了其在荷载评估基准期内的统计参数，讨论了闸门主梁受弯碱坏时可靠指标随继续使用期的变化。     

TCP稳态流中慢启动序列对吞吐量性能的影响

在计算TCP稳态数据流吞吐量时一般都忽略了由于分组丢失而形成的各个慢启动阶段。在考虑TCP稳态数据流中慢启动序列的情况下,对Padhye的经典TCP稳态数据流模型进行了扩展。通过将Padhye的模型与扩展后的模型作比较,证明了在使用Padhye的模型作为多媒体流量控制模型时忽略超时后慢启动阶段的可行性和正确性。     

点阴极电场辅助阳极连接中的紧密接触面积和电流

用等效电路的方法研究了点阴极情况下的电场辅助阳极连接效应，计算了连接电流，连接孕育期和紧密接触面积，本文结果表明，连接初期电流迅速衰减，随后缓慢变小，直至某一稳定值，孕育期随温度上升指数下降，连接温度高时，孕育期将难以观察到；待连接表面之间紧密接触面积随时间延长而非线性扩展，紧密接触区域增大时，其边界向外推进速度渐小，而接触面积增加渐快。